Bilateraal onderzoek
Neem een voorsprong op je concurrenten dankzij een bilaterale samenwerking met imec.
Coöperatieve R&D samenwerking
Beperk je risico’s en verlaag je kosten door samen met andere bedrijven precompetitief onderzoek te voeren.
Voorbeelden
Verken de manieren waarop imec de toekomst verandert.
imec.istart
Wil je een versnelling hoger schakelen met je techstart-up? Klop dan aan bij imec.istart.
imec.xpand
Wil je met nanotechnologie de markt op? Imec.xpand ondersteunt je van begin tot eind.
Spin-offs
Verken hier de lijst van spin-offbedrijven van de Vlaamse innovatiehub voor nano-elektronica en digitale technologie.
/Vacatures/Process Assistant Wet Coatings (temporary assignment)

Process Assistant Wet Coatings (temporary assignment)

Research & development - Leuven | Just now

You will prepare coatings including precursor formulation, controlled wet deposition/drying and physical characterization.

Process Assistant Wet Coatings (temorary assignment)

You are responsible for the deposition of wet coatings, including the chemical formulation that precedes this. The controlled drying of these coatings and their physical characterization are also part of the job description. You will work in close collaboration with the responsible researchers and engineers, who will coach and guide you in your daily operations.

The assignment

You perform the following tasks

  • Development of formulations and deposition of them on flexible/fixed substrates using for example spin or dip coating. In a later instance, other deposition techniques can be considered, for example spray coating.
  • You check the stabilization of the formulation and verify the correct thermal treatment during the drying of the wet coating.
  • Experience with physical characterization is a plus (e.g. optical and/or electronic microscopy).

Required knowledge and skills

  • You are an industrial engineer or have a bachelor's degree in chemistry with work experience in the deposition of wet coatings;
  • You can work accurately and organized, and enjoy working in a team and under the guidance of senior researchers/engineers;
  • You have experience with optimizing chemical formulations, preferably also with handling air-sensitive reagents (e.g. working in glove boxes);
  • You have experience in implementing clean and reproducible procedures;
  • Experience with electron microscopy characterization and with wet coating techniques is an asset.

Duration of the assignment

1 year

Desired start date and work regime

As from January 2021 - fulltime

In order to ensure a smooth start, we prefer that candidates are already residing in Belgium.

Location

imec Leuven + EnergyVille Genk

* This position is also available for direct applicants, who are Freelancer or are able to work via a temporary agency. Consultant Agencies, who wish to submit a candidate, can contact Flexforce.